sanitizing fresh tanks - basic question
80 gal fresh tank I have 10% bleach (labeled Chlorinating liquid, which I use to do my pool following the TroubleFreePool Method). Most sites say 1/4 cup bleach per 16 gallons which would be 1.2...
Forum Discussion
Here is my routine
1. pour the bleach in the hose
2. run the water through the hose and fill the tank
3. run all the faucets and toilet and so on
4. let this all sit 8-24 hours
5. I open up all the faucets and let the solution run through until the tank is empty.
6. I refill the tank then open up all faucets and let it run through until the tank is empty
7. I repeat the fill/drain again
Yes it uses a lot of water to do this
5.
1. pour the bleach in the hose
2. run the water through the hose and fill the tank
3. run all the faucets and toilet and so on
4. let this all sit 8-24 hours
5. I open up all the faucets and let the solution run through until the tank is empty.
6. I refill the tank then open up all faucets and let it run through until the tank is empty
7. I repeat the fill/drain again
Yes it uses a lot of water to do this
5.
