sanitizing fresh tanks - basic question
80 gal fresh tank I have 10% bleach (labeled Chlorinating liquid, which I use to do my pool following the TroubleFreePool Method). Most sites say 1/4 cup bleach per 16 gallons which would be 1.2...
Forum Discussion
I promise I wasn’t trying to stir up a hornet’s nest!
I finished. I drained the rinse straight onto the ground after flushing through the faucets a minute or two. That water is safe for plants and such, no reason to wait thirty minutes on the water pump.
Question remains about the hot water heater. After doing all of the above, I wanted to replace the anode rod, when I pulled out a bunch of water came out. So clearly that was’t drained when the fresh tanks were empty. Was it sanitized? If not how would I do that?
I finished. I drained the rinse straight onto the ground after flushing through the faucets a minute or two. That water is safe for plants and such, no reason to wait thirty minutes on the water pump.
Question remains about the hot water heater. After doing all of the above, I wanted to replace the anode rod, when I pulled out a bunch of water came out. So clearly that was’t drained when the fresh tanks were empty. Was it sanitized? If not how would I do that?
