2018 Ram bumper trailerplugin
I thought I could plug the camper into the 7pin hole in the rear of the truck and the utility trailer in the 4 pin hole. Problem is only one door can be opened at a time has anyone noticed this design...
Forum Discussion
Is this for a slide in camper and a trailer? If you can use a 7 pin in the bed of the truck, there is a kit you can buy to do just that. You disconnect the vehicle wiring from the 7 pin in the bumper and this special harness connects to the 7 pin and the original vehicle harness plugs into the new special harness, basically a T harness. It is several feet long and has a 7 pin on the end of it, which you mount in the bed.
https://www.etrailer.com/Wiring/Bargman/50-97-410.html
https://www.etrailer.com/p-41157.html?hhyear=2018&hhmake=Ram&hhmodel=2500
Older Ram trucks have the 4 way dangling from the harness underneath the bumper.
Charles
https://www.etrailer.com/Wiring/Bargman/50-97-410.html
https://www.etrailer.com/p-41157.html?hhyear=2018&hhmake=Ram&hhmodel=2500
Older Ram trucks have the 4 way dangling from the harness underneath the bumper.
Charles
