6-way connector + question
So I need to wire up the 6 way connector on my truck. I’ve got all the other wires figured out. I don’t have my MH or the cable at home yet. Looking on line it shows the middle pin to be the batt +. J...
Forum Discussion
So my next issue is/was figuring out how to have the brake lights not over ride the RV brake lights wired into the truck. With the Brake Buddy when it activates my brake lights will come on, which will over ride the turn signal if I’m changing lanes. I didn’t want to wire in a relay, and cut even more of the trucks wiring. So I used a red LED in the back up light housing. It only works when the MH is connected. So now when I’m stopping, you can still see a flashing bulb on either side.
Even with this done. I was thinking even before this, what are the chances I’ll be stopping at the exact same time I’m changing lanes?
Even with this done. I was thinking even before this, what are the chances I’ll be stopping at the exact same time I’m changing lanes?
