Andersen hitches question

I think you'll do fine with that weight.

I have a 6,000 lb TT and don't feel the Andersen does enough weight distribution. I've read other threads where the 100% happy Andersen owners had 3/4 ton TV's, so it wasn't as essential as it is with lighter duty TV's.

I love how easy it is to hook up and my wife can get us fully ready to go if needed. I think it is OK on sway, and it got better when I added a bracket where the hitch goes into the receiver to take out some of the slop.

Thank you everyone for your info and tips...
Steve

greydog wrote:
I bought an Andersen hitch with our K-Z 251RK trailer but have not picked it up yet. I can see changes I might want to make to the trailer brackets but apart from that, I'm adopting a "wait and see" stance. One thing, people say no grease is necessary but if one is spending much time on rough or uneven roads, I think it would be beneficial to grease the ball. There is some movement (up and down and a swivelling movement) and where there is movement, there is wear. We tow with a 3500 Ram so weight distribution is not a huge issue. GD

Agree 100%. I have greased the ball since the first time we used the hitch and continue doing so. There may not be any movement when turning, but as you say, uneven roads and bouncing will still cause the ball to swivel.

You will get more responses in the "Towing" section.

I bought an Andersen hitch with our K-Z 251RK trailer but have not picked it up yet. I can see changes I might want to make to the trailer brackets but apart from that, I'm adopting a "wait and see" stance. One thing, people say no grease is necessary but if one is spending much time on rough or uneven roads, I think it would be beneficial to grease the ball. There is some movement (up and down and a swivelling movement) and where there is movement, there is wear. We tow with a 3500 Ram so weight distribution is not a huge issue. GD

Steve 911 wrote:
Hi all,
I’m looking for information from those who use Andersen WD hitches to pull a 3,500 tt.
I presently use an E-2 setup, which works fine, however, the weight of it is getting to be a burden, and I want something reliable and lighter..
Any feedback is greatly appreciated.
Steve

The Anderson would be perfect for that size trailer

Thank you all for your information. Very helpful...
Steve

I've been using it over 4 years on our 5,000 lb camper. Works great, easy to set up and no issues.

If you decide on a Andersen WDH you won't be sorry. It's a lot lighter then the Reese WDH. And once you get it installed and setup correctly you'll be a happy camper. Now! Here's a little tip. When you go to hitching up your trailer on the ball, do not let all the weight onto the ball. Hock up the chains and tighten them up before dropping all the weight on the ball.

The Andersen worked great for me also. I had an adequate tow vehicle towing a 6,000 pound trailer. Quiet, clean, lightweight, takes care of the bounce and sway.

There might be some who have never owned one that don't like them on principle.