Andersen WD hitch review
Well I just wanted to give a little review of my first real tow with my new Andersen hitch. I towed almost 500 miles from SoCal to Southern Utah with it and was impressed with it. It towed about the...
Forum Discussion
What Ford truck do you have? Here is the information from a 2020 F350 owners manual:
When hooking-up a trailer using a weight-distributing hitch, always use the following procedure:
1.Park the loaded vehicle, without the trailer, on a level surface.
2.Measure the height to the top of your vehicle's front wheel opening on the fender. This is H1.
3.Attach the loaded trailer to your vehicle without the weight-distributing bars connected.
4.Measure the height to the top of your vehicle's front wheel opening on the fender a second time. This is H2.
5.Install and adjust the tension in the weight-distributing bars so that the height of your vehicle's front wheel opening on the fender is approximately halfway between H1 and H2.
6.Check that the trailer is level or slightly nose down toward your vehicle. If not,adjust the ball height accordingly and repeat Steps 2-6.
When hooking-up a trailer using a weight-distributing hitch, always use the following procedure:
1.Park the loaded vehicle, without the trailer, on a level surface.
2.Measure the height to the top of your vehicle's front wheel opening on the fender. This is H1.
3.Attach the loaded trailer to your vehicle without the weight-distributing bars connected.
4.Measure the height to the top of your vehicle's front wheel opening on the fender a second time. This is H2.
5.Install and adjust the tension in the weight-distributing bars so that the height of your vehicle's front wheel opening on the fender is approximately halfway between H1 and H2.
6.Check that the trailer is level or slightly nose down toward your vehicle. If not,adjust the ball height accordingly and repeat Steps 2-6.
