Awning retraction
My awning does not retract as snuggly as it used to. Sometimes we have to push on the frame arms to get it to finish going up. Is their any type of way to adjust it? Spring tension, etc?
Forum Discussion
The Screws are supposed to keep the outer edge of the Fabric from walking along the Groove in the Roller Tube. They may not even be installed on Your Awning.
DO NOT attempt to re align the actual Ends of the Awning Tube.
If the Fabric has moved along the Tube ,You will be able. To tug it one way or the other while the Awning is extended and in the lowest position.Just keep moving the fabric until everything aligns properly when it retracts. Then secure the Fabric with a Stainless Steel Screw at each end. Or just figure on making this No Tools adjustment from time to time!
DO NOT attempt to re align the actual Ends of the Awning Tube.
If the Fabric has moved along the Tube ,You will be able. To tug it one way or the other while the Awning is extended and in the lowest position.Just keep moving the fabric until everything aligns properly when it retracts. Then secure the Fabric with a Stainless Steel Screw at each end. Or just figure on making this No Tools adjustment from time to time!
