Back-up cameras

Hard wiring is ideal because there is no signal interruption. However, with a TT it is a long reach and has too many connections to go wrong. As long as you have a clean site line the wireless ones are great. They are also easy to move around or change to another vehicle.

I also got a Rear View Safety wired system for my Class C. Used it as a rear view mirror since the actual mirror had a very limited view.
Mounted inside to avoid drilling and weather. Worked great. Has a wide angle lens and other vehicles were much closer than they looked. It gave an excellent view of my car behind and what was right next to my car. Used outside mirrors for stuff further down the road. Good for maybe 50 yards behind my RV, then went to outside mirrors. Plugged in to Cig lighter.
It does have lights that come on after dark and make it sort of useless. However, I always, except once, never drove at night.
I read a lot of bad things about wireless systems and went with the wired for no interrupted signal.

I like the system from Rear View Safety. It's two channel, offers a view of the fiver from the rear of the fiver and the rear of the truck, where I can keep an eye on the fiver tires. It's a wired system.

I have a Tadibrothers wireless backup camera I put in the back window of my trailer because I didn't want to drill holes. Wired it to a light over the sink. It works great for monitoring traffic behind and backing up.. I did have to get long range antennas for it to be able to monitor it in my tow vehicle because of the length. Because my monitor has two inputs I just added a second wireless camera over the hitch receiver for hooking up. I really like my setup. Have about $350 invested.

I purchased the refurb Yada Wednesday and got it today. Will get it installed this weekend and report back.

I have a cheapie wireless backup camera that attaches to the license plate screws. I got it with my credit card points. If you had to buy it out right it would be about 30 bucks. If you want a good one you have to spend more money then that. Mine does work but, there is often too much interference and the picture can be hard to see at times too. It's better then nothing but, I suggest spending more money and getting a better one then I did.

Kinda funny though. Because it's wireless I sometimes pickup up the picture from other wireless security cameras as I drive down the road. At one of my local grocery stores I can set in my pickup outside the store and see who is inside before I ever enter the store. lol

2012Coleman wrote:

Dakota98 wrote:
This is where I have my camera located.

Well, that beats the snot out of the iball. I do see a wire going to the camera - what is it for / where does it go?

The wire goes to the wireless transmitter. The transmitter can be mounted behind the tail light assembly. The 12 volt power lead is connected also to the transmitter & can be connected to any 12 volt power source of your choosing at that location. I chose to run a longer length of cabling inside my frame rail & up through my rear sliding window & mounted the transmitter to the inside. The monitor plugs into your 12 volt outlet inside the cab.

2012Coleman wrote:
I do see a wire going to the camera - what is it for / where does it go?

The wire powers the camera. Camera and monitor, both need some kind of power. The wireless part is between the camera and monitor.

Dakota98 wrote:
This is where I have my camera located.

Well, that beats the snot out of the iball. I do see a wire going to the camera - what is it for / where does it go?

Go on e-bay, you can buy a wireless 7" monitor with camera from china for $ 8 89.00 with free shipping. Takes about 3 weeks for delivery, but the price and quality is good.