Bars not releasing
I have the Reese dual cam wdh setup. I have used this on a Jayco 23B and Jayco 28rls with no problems. When unhichting, I would raise the front of the trailer, unclip the saddles and drop down ...
Forum Discussion
Wowwwweeee
I have learned more in five minutes about a wdh than in the past 5 years.
Often wondered if my hitch was wearing funny or if the weird wear was okay. After looking at the pictures, mine are fine.
I really appreciate the pictures and the posts.
When I take the bars off, the cams will come down but are a little on the stiff side. They don't just drop down. I will give loosening the bolt a try on Sunday.
Other thing, might seem a bit odd but when you put the chains on the cam, do the bolt ends go on the inside or the outside? I put them on the inside but would turning them around make a difference?
I have learned more in five minutes about a wdh than in the past 5 years.
Often wondered if my hitch was wearing funny or if the weird wear was okay. After looking at the pictures, mine are fine.
I really appreciate the pictures and the posts.
When I take the bars off, the cams will come down but are a little on the stiff side. They don't just drop down. I will give loosening the bolt a try on Sunday.
Other thing, might seem a bit odd but when you put the chains on the cam, do the bolt ends go on the inside or the outside? I put them on the inside but would turning them around make a difference?
