Best 5vr Slider for GM Puck Setup
Bought a new GMC Seirrra 3500 Denali standard bed over the weekend and now in the market for the fifth wheel hitch. The truck came with the factory installed Puck setup and I am quickly finding the h...
Forum Discussion
Cummins12V98 wrote:
Another thing about the Curt is the heads pivot point is several inches below the hitch plate. The B&W's pivot point is in line with the hitch plate/kingpin.
Reason I mention this is it is documented here several times that people have CHUCKING with this Curt setup!
The Curt pic is from an in law he HATES it as it's a PITA to unhitch at times if RV and Truck are not on the same plane side to side. He has said many times "I wish I had your B&W". His Curt came with his truck.
Good pics.
I measured the top of the trailer one day on my old truck. With the new trucks sitting higher, I’m assuming the trailer will sit higher still. The level height out of the factory is 13’-4” so I was sitting 2” nose high with the old truck
