If you use a Prodigy P2 / P3 or some other inertia (aka: motion) sensor brake controller and feel the trailer brakes are "sluggish" at times, recommend replacing trailer's factory linear brake wring with a thicker wire STAR design configuration. STAR configuration is much safer and its electrical current is much better balanced as well.
If wondering, ALL of my utility, boat and RV trailers have STAR design brake wiring - using thick 10 guage wiring from front to back. Wish this STAR design was minimum factory build on ALL trailers.
For more details, surf:
Factory build
- click here - STAR design
- click here - Hope this helps as well….