B&W for Ford factory 5th prep

After some good research, I think I'm going to go with the Ford 5th wheel hitch which is a Reese Elite 25k. The hitch height for the B&W is 16 3/4" and the height for the Reese/Ford hitch is 14 1/2". With the Companion slider, my 5er has been slightly nose high. The height of the slider is 17". With my 5er being 13'5", I could use a little more wiggle room.

You will like the 3300 for OEM Ford. The head will be the same, but the base is much lighter, only slightly heavier than the head (about 78 lbs IIRC). The puck system is easier in/out also.

Jerry

I have a Ram with pucks but it basically works the same as Ford, you will like it. Ram has a wider footprint base.

Moderator edit to re-size pictures to forum recommended limit of 640px maximum width.

stickdog wrote:
According to B&W it's good for 20,000 read here: http://www.turnoverball.com/products/puck-mounted-attachment/companion-oem-5th-wheel-hitch-fits-ford-puck-system

So it is...I stand corrected. I thought it was 18k, thanks!!

According to B&W it's good for 20,000 read here: http://www.turnoverball.com/products/puck-mounted-attachment/companion-oem-5th-wheel-hitch-fits-ford-puck-system