Forum Discussion
down_home
Dec 25, 2013Explorer II
The cure is going to require insulating with a moisture barrier on the outside.
Look at the clearances you have on the bottom, of slides and sides and top.
If it is feasable since I bet the exterior box is aluminum apply insulated board or material on the inside, in contact with the aluminum. It means it can't adsorb moisture and will have to cover to the edges. Then some provision for air to circulate. Like others have said it may require little fans. I'm basing this on what I've noticed about ours except the slide is insulated.
Look at the clearances you have on the bottom, of slides and sides and top.
If it is feasable since I bet the exterior box is aluminum apply insulated board or material on the inside, in contact with the aluminum. It means it can't adsorb moisture and will have to cover to the edges. Then some provision for air to circulate. Like others have said it may require little fans. I'm basing this on what I've noticed about ours except the slide is insulated.
About RV Tips & Tricks
Looking for advice before your next adventure? Look no further.25,174 PostsLatest Activity: Nov 03, 2025