Corn hole game

2oldman wrote:
The moderator must have looked up the word.

BurbMan wrote:
the guy asks an honest question and gets tarred/feathered.

The guy didn't. The word did.

You are almost correct. There was one poster that asked what class of person would use that name for a game. That was a direct insult to me.

The moderator must have looked up the word.

BurbMan wrote:
the guy asks an honest question and gets tarred/feathered.

The guy didn't. The word did.

Thanks for the few helpful post and moderator for cleaning up the others. I have a good set of boards my brother made but it is time to repaint them and just want something different.

Thanks for cleaning up this thread, the guy asks an honest question and gets tarred/feathered.

place holder

bird take your board to a sign shop they can print you some up

Here is some helpful info. There's a place in Portland, OR that makes custom cornhole sets with any image you send them. We have a place here in Louisville that does the same thing.

Camping World has this set with an old Airstream and a camping theme.

its because the bags are filled with dried corn there also is a washer game played on the same platform

Get on the internet, do a search for Old Campers (RV's). Copy the image you like to a Word Processing application and print the image. Take the image and cut it out of the page, trace it on the top of the board, and then paint it with a set of modeler's paints, (like Testors). If you personalize it in such a way as this, it add so much more character and indivudualizes your work. You can gloat because you did the paint and didn't just paste something ready made on it.

If you need the image bigger, you can expand the image over several pages by zooming in with the word processor and print smaller sections blown up and piece them together. Or do the proportional tracing by using a square grid line and free hand the outline. Either way, it will be uniquely yours.

Beside, if the corn bags scar the paint, you can touch it up easily. If you purchase a ready made graphic, and it get's scared up by a bag sliding over it or pounding on top of it, it will rip and tear and wear and look bad after a while. You won't be able to fix it, and removing it will next to impossible.

Just some suggestions.

Good luck.

There are several places out there that will do custom graphics to put on your boards. You can even submit your own photos to be vinyl printed to attach to your boards. Just do a internet search, they are abundant.