crimping battery lug
Ok, this is on my boat but very well could be an RV question so I hope it is appropriate. While replacing a pump I noticed one of the positive battery cables going into the battery selector switch...
Forum Discussion
Had a long response but site crash...
There are many set screw type connectors you can use. Or just ghetto crimp it with some channel locks, or solder a new end on with a butane torch or propane torch on low, if you have the clearance for an open flame.
There are many set screw type connectors you can use. Or just ghetto crimp it with some channel locks, or solder a new end on with a butane torch or propane torch on low, if you have the clearance for an open flame.
