Dexter Nev-R-Adjust hub out-of-round
I read the long and very informative post from 2010 about the need for the hubs when using these self-adjusting brakes to be within 0.015 specification. When I hit the brakes it seems like there is a...
Forum Discussion
Have you or anyone actually removed the hubs to check the brakes? A pulsing brake is more common with a rotor being bent, rather than an out of round drum. I suppose, if out of round enough, could pulse, but may be best to just replace the drum, if that is the actual problem. OTOH, could be a wiring short, causing intermittent operation.
Jerry
Jerry
