Dexter Nev-R-Adjust hub out-of-round
I read the long and very informative post from 2010 about the need for the hubs when using these self-adjusting brakes to be within 0.015 specification. When I hit the brakes it seems like there is a...
Forum Discussion
I remove the hubs, repack and check the brakes annually.
If you look at the 2010 post (see below), you will see that the WORRY is that a sufficiently out-of-round hub will make the self-adjuster over-adjust, heat up, and likely fail one way or another. That would suck coming down a mountain in the middle of nowhere.
https://www.rv.net/forum/index.cfm/fuseaction/thread/tid/23458294/srt/pa/pging/1/page/1.cfm
If you look at the 2010 post (see below), you will see that the WORRY is that a sufficiently out-of-round hub will make the self-adjuster over-adjust, heat up, and likely fail one way or another. That would suck coming down a mountain in the middle of nowhere.
https://www.rv.net/forum/index.cfm/fuseaction/thread/tid/23458294/srt/pa/pging/1/page/1.cfm
