Dexter Nev-R-Adjust hub out-of-round
I read the long and very informative post from 2010 about the need for the hubs when using these self-adjusting brakes to be within 0.015 specification. When I hit the brakes it seems like there is a...
Forum Discussion
This trailer is a 2018 Rockwood. I took 2 drums to a shop, and they were both out-of-round by 0.020-0.030. Dexter spec is 0.015 or less.
I am concerned about "chamfer" centering reply above. What does chamfer mean? I can't find anything regarding chamfer and brakes other than slotted pads or rotors. confused.
Qhote: (I had him shut the machine off. What we found was his machine used the the hubs chamfer to center the hub. The chamfer was turned off center at the factory. The chamfer did not locate anything but was for clearance only.
I took the hubs and found a shop that use the hubs centers for machining.)
I am concerned about "chamfer" centering reply above. What does chamfer mean? I can't find anything regarding chamfer and brakes other than slotted pads or rotors. confused.
Qhote: (I had him shut the machine off. What we found was his machine used the the hubs chamfer to center the hub. The chamfer was turned off center at the factory. The chamfer did not locate anything but was for clearance only.
I took the hubs and found a shop that use the hubs centers for machining.)
