Dinghy Towing switches for fuses
Please excuse any need to repost, but have been searching for an hour. When I was researching getting ready to tow a vehicle behind our Seneca, I found switches that would make it you didn't have to ...
Forum Discussion
Here is link to Roadmaster kit. May not be the one for your toad.
Fuse master kit
Yes, the fuse is removed, you then splice a new fuse and the switch into a piece of wire. Then install 1/4 spade male connectors on each end which are plugged into the fuse holder.
Fuse master kit
Yes, the fuse is removed, you then splice a new fuse and the switch into a piece of wire. Then install 1/4 spade male connectors on each end which are plugged into the fuse holder.
