Equalizer Bolt Head Sheared Off
My husband just went out to clean up our Equalizer hitch and found that the head of the angle set bolt has sheared off completely. We have no idea how this happened. Has anyone ever heard of this? ...
Forum Discussion
If the bottom adjustment bolt is sheared off then somebody way over tightened it at some point.
If you disassemble the head by pulling the side bolts you should be able to tap on the end of the bolt with a small hammer. Tapping should relieve the tension on the bolt and you will probably be able to unscrew it by hand.
If you disassemble the head by pulling the side bolts you should be able to tap on the end of the bolt with a small hammer. Tapping should relieve the tension on the bolt and you will probably be able to unscrew it by hand.
