Eternabond
Very quick question.....should the Eternabond tape on top of my slides be perfectly flat?.....and/or is it okay to have some bubbles or raised spots on the edges? If NOT, can I just seal the bad spot...
Forum Discussion
CarlGeo wrote:
If Eternabond is applied correctly the edges will be completely flat along the edges AND are not required to be "sealed".
After a few years in the AZ sun, I'm glad I sealed my edges.
BTW, Dicor will seal the edges just fine on a flat surface. However, on a curved surface I recommend using EternaCaulk. Also, EternaCaulk is clear, Dicor is not which may make a difference to some.
