Flat Towing a Chev Pickup
Just purchased a 2015 Thor Palazzo 35.1 and I would like to flat tow my 2013 Chev 4X4 LT pickup instead of having to buy something else. I have read instructions on mounting a Blue Ox baseplate and th...
Forum Discussion
Mike.....I tow my 2012 Silverado 4 down. I did my own install of the Roadmaster brackets. Like Scott said, I've done 5 or 6 set ups and the truck was the easiest.
Side Note: On your truck, the neutral position, for towing, is not visible on the knob. The truck needs to be running, shift into neutral and then turn the 4x4 selection knob clockwise all the way and hold it for about 6-10 seconds. The "N" will light up in red and your dash will say that your Stabilitrac has been turned off. I always double check that the truck doesn't shift into Drive or Reverse.
Side Note: On your truck, the neutral position, for towing, is not visible on the knob. The truck needs to be running, shift into neutral and then turn the 4x4 selection knob clockwise all the way and hold it for about 6-10 seconds. The "N" will light up in red and your dash will say that your Stabilitrac has been turned off. I always double check that the truck doesn't shift into Drive or Reverse.
