Free Water
Got some trips planned that do not have water fill up ability. Need to fill up before arriving. Dont want to travel 100+ miles or more with 66 gallons of water onboard. Any suggestions where I should...
Forum Discussion
Lynnmor wrote:marcsbigfoot20b27 wrote:
No, that's why I want to block the vent line with a plug or valve that has a small ORIFICE in it to LIMIT the volume of water that flows out while still allowing it to vent and not overpressure.
I would rather it pizzle than pour.
You really don't understand. There are two 1/2" vents and one 1/2" supply line. It is that way to prevent a pressure buildup while filling. With water being supplied at 30 to 90 psi, a small vent hole will only reduce the pressure a fraction. Why would one not do it right? :h
Either we are talking two different TT's or YOU don't understand.
I have one 1" fill hose and ONE 1/2" vent hose that are both 6 inches above the top of the tank. That's why it leaks out the vent.
If I put in a ball valve I can stop the flow but it won't vent unless slightly open which is too hard to tell, therefore I can drill a small hole in it so when it's closed it can still vent like it was slightly open. If I want to FILL then I will open the valve to allow full venting.
