Fridge condensation drain caused delamination
I noticed a small bulge below the lower fridge vent yesterday so took the vent cover and surround off to find delamination across about three inches and extending down to the bottom metal valence. ...
Forum Discussion
TimnJo wrote:
After doing some research I decided to use Gorilla Glue as there was still moisture, I slid an awl down to create a channel for the glue to follow and squirted a generous amount down the gap.
I then used a cargo jack between the house and a piece of board to press it in place.
Today, after replacing and recaulking the vent you can barley notice it; just a slight bulge but firm with no give.
I'd like to know more about this process! Do you have a link or some pics?
