Front leg will not work
When we went to unhitch our 5th wheel yesterday after getting it off the truck the front legs blew a fuze. I replaced the fuze but now it appears that one of the legs does not work. There is one mot...
Forum Discussion
Bob Vaughn wrote:
My frame is by Lippert so I assume that the mechanism is made by them also
Then definitely what Old-Biscuit said. Our chassis is Lippert with Lippert 2.0 landing gear. The bolt that connects the drive shaft to the motor side sheared. A quick trip to Lowe's (we also travel with a Toyota) for a replacement bolt fixed the problem. They usually shear because the two sides are out of sync. When I put ours back together, I made sure the slave side was 1/2 turn short of full-stop in the up position when the drive side ratchet was clicking "all the way up." That way, the motor won't try to force the slave side before the drive side stops.
Rob
