Going to try my Dual-Cam out again...
I started with dual friction bars, then went with Dual-Cam (the first generation). It destroyed my hitch at the time. In Hind sight, I used a worn out Husky hitch and added on the Dual Cam adaptors ...
Forum Discussion
I like my DC but it's big downfall IMO is the lack of head tilt. At least in the round bar version. It has that 6 sided washer that only nets you about 5-6 degrees of tilt. I ended up using a 2" rise ball to get it where I wanted. That and shimming the shank to receiver slop, which eats up about 2 degrees. Actually the 2" rise ball is only about 1.5" higher than a standard ball. But it did the trick. Another key is adjusting the cams. Leaving the nuts loose and making left and right turns and straight driving for 150 feet or so and then tightening the lock nuts. Something my dealer failed to do. They're great once you get them right!
