Good and Bad about Blue Ox Sway Pro

New design is terrible. There is no adjustment to sway in the head. The old design had one bolt per side on the bottom so you could adjust the torque setting for more or less sway control. Those bars swing freely in the new design. Where your arrow is pointed is just the catch for the trunion bar. The hard tilt used to be adjustable with a thumb screw now its cast in. Need more or less tilt - out of luck. Those brackets on the A-Frame are attached with one bolt. It threads into the back of the bracket. Its not pointed, just a standard bolt. I do seem to recall zerk fittings for grease on the new design. You do not grease where the bars go in, they call it a "clean" design.

When I spoke to them on the phone multiple times about this new design (I had ordered what I thought was the old but all they had was this new one) they kept telling me that all the sway control was in those hanging chains that are wrapped around that bracket. The way the bracket wraps around the chain was supposed to supply control. I asked it they were joking several times and they sounded serious...