Forum Discussion
dcmac214
Mar 12, 2011Explorer
Repeat of someone else's earlier post. My height checker (story stick) is a 1" PVC traveling inside a 1-1/4 or 1-1/2", can't remember and the marking paint's long since worn off, PVC pipe, both cut to 94" (TV is full 8 foot bed pickup) with two matching 1/4" holes thru both sticks for heights of 14' and the absolute minimum of 13'6". The smaller stick travels inside the larger stick, real good fit, bolt and wingnut hold them together. Use the bolt & wingnut in the larger stick as a stop so the two sticks together give me the height I need. Not really needed, I Dremel hand-ground the measurements at the two holes and filled in with a little bit of paint, making it real difficult to set up the wrong height.
DC
DC
About RV Tips & Tricks
Looking for advice before your next adventure? Look no further.25,191 PostsLatest Activity: Apr 01, 2026