Handy Hints, Gadgets, Products & Gizmos
Another member suggested a new forum section with new products but it doesn't look like it will be feasible. So I thought I would post this here under General RVing Issues. If enough people post (even...
Forum Discussion
OK, BUMP it is.
I built these out of 3/4" solid core underlayment grade Douglas Fir plywood. By raising the landing gear rams it made for a more solid platform. Also the popping in the hydraulic system stopped. I added a 3" lift at MORryde to get the RV level so the rams were then 3" higher off the ground.
I used 2" coated #10 drywall type screws and PL construction adhesive to assemble.
1/4" rubber padding and "D" rings came from AMAZON.
I built these out of 3/4" solid core underlayment grade Douglas Fir plywood. By raising the landing gear rams it made for a more solid platform. Also the popping in the hydraulic system stopped. I added a 3" lift at MORryde to get the RV level so the rams were then 3" higher off the ground.
I used 2" coated #10 drywall type screws and PL construction adhesive to assemble.
1/4" rubber padding and "D" rings came from AMAZON.
