Have You Installed Your Own Slide Topper?
I am thinking of ordering and installing a slide topper on my RV. My side measures flange to flange at 7'6" (or 93"). When I go on Solera's site I see the closest topper sizes at 8' (or 96") or ...
Forum Discussion
Ok, I get it. Typically a Slide Topper is measured outside flange to outside flange. My flange to flange measured 93 inches and I ordered 96 inches. My slide topper sticks out past the slide flange on each side about 3 inches on each side.
You could order your slide topper a little less than the distance between flange to flange. Lets say yours measures 12'6". Instead of ordering larger you could order smaller lets say 12 feet which would be 6 inches less a difference of 3 inches on each side which hypothetically would put you flush with the flange.
Of course you will have to check all your own measurements. And for something that close I would pay to have it done and tell them what your situation is so they can plan for it.
You could order your slide topper a little less than the distance between flange to flange. Lets say yours measures 12'6". Instead of ordering larger you could order smaller lets say 12 feet which would be 6 inches less a difference of 3 inches on each side which hypothetically would put you flush with the flange.
Of course you will have to check all your own measurements. And for something that close I would pay to have it done and tell them what your situation is so they can plan for it.
