I have a question
I was changing out my 1141 bulbs this morning and on one switch there are 2 fixtures with 2 bulbs each I swapped out the 2 bulbs in the first fixture and started to do the 2nd fixture I swapped the fi...
Forum Discussion
Bob Vaughn wrote:drsteve wrote:
This kind of head-scratching electrical stuff is often caused by a bad ground somewhere. Check all grounds before replacing anything.
I have two new light fixtures and I plan on swapping the two out tomorrow.....I hope this solves the problem.....I wonder if it is in the master switch which is located in a switch cabinet....
I found the problem...I had installed a voltage display and had paired it with the light switch for these two lamps, when I disconnected the ground of the meter the lights worked correctly . Now I have to find a different way to connect my meter....There is no rhyme or reason as to the color of the wires connecting the 3 switches in this panel....
