Information Discussion for Gate Guards

waywardwinds wrote:
i read all 109 pages and leaned alot about fulltimeing and gate gaud work and now we have contacted sitewatch kc and trinty and others not heard much back from any of them yet though
john and carol
and one ugly lab
2001 holliday rambler moho

Try D.A.D.S 210-844-7393 and D&G Enterprise 817-291-2737 Don't know if they have a gate, but get your name out there

i read all 109 pages and leaned alot about fulltimeing and gate gaud work and now we have contacted sitewatch kc and trinty and others not heard much back from any of them yet though
john and carol
and one ugly lab
2001 holliday rambler moho

Yes, since you don't want to read and learn, it is just you sit and watch a gate to make sure it doesn't move. They pay big money for that. Good luck

Just skim them....who knows maybe you will learn more than what anyone could post again!:)

I am interested in gate work ! What is it ? Do you sit and guard a gate all day long ? What do they pay a beginner ? I did not want to read 109 pages to find out ! Have pity on this old man !

rhianna wrote:
We are Gate Guarding in TX. We are hooked up to a new 20k generator Cat with 50 amp. It is running at 63 hz instead of 60 hz. Have any of you had any problem with damage from this? Our clocks are running fast. I'm concerned that it may damage our electronics. We use a voltage regulator and the voltage seems to be fine.

This is not uncommon with generators. A tech should be able to adjust it. We have found our electric clocks to be unreliable out here and have battery clocks. To answer your question-the chance of damage should be neglible.

I once was 18 and fearless-don't know how I survived those years. This is so sad and tragic. Unfortunately we have had many fatalities around the Tilden area too. The police presence around here is almost oppressive at times.

Sorry to say, the outcome was not good......Double fatality....

Info on GG

I was coming home from Cotulla yesterday and got stuck on 624 for 1 1/2 hours. A head on colision on 624 south of Cotulla, at the top of a hill on a curve and double yellow line. This morning our ranch security came by to check on us and told me it was a gate guard coming home from shopping in Cotulla.I feel so bad for his wife.
Every one please be careful on these roads. These people pass on curves, hills and double yellow lines. I have seen it 100 times.

We are Gate Guarding in TX. We are hooked up to a new 20k generator Cat with 50 amp. It is running at 63 hz instead of 60 hz. Have any of you had any problem with damage from this? Our clocks are running fast. I'm concerned that it may damage our electronics. We use a voltage regulator and the voltage seems to be fine.