jack pads
We are here in the Mohave. It almost sees the sand is quick sand. I have some large sections of 2"x12" for jacl pads but haven't put them under the jacks. Figured the sand etc was good enough. We ha...
Forum Discussion
That’s what sand does if it gets super saturated.
What’s wrong with the 2x12s? Cut them into 1-2’ lengths? Double them up? Cut up some 3/4 plywood? Double it up?
You’re leveling a 38klb rig presumably? Can’t think of a large enough stack or cutting boards to be rigid enough.
Lumber is your easiest, cheapest, bestest option here, imo.
How big a surface area are the moho jacks? Like 6” diameter? 12”x12” will reduce the ground pressure to less than 25% of 6”
What’s wrong with the 2x12s? Cut them into 1-2’ lengths? Double them up? Cut up some 3/4 plywood? Double it up?
You’re leveling a 38klb rig presumably? Can’t think of a large enough stack or cutting boards to be rigid enough.
Lumber is your easiest, cheapest, bestest option here, imo.
How big a surface area are the moho jacks? Like 6” diameter? 12”x12” will reduce the ground pressure to less than 25% of 6”
