Jacking
Hi again. Have a flat on right rear, trailer weight in the 5500# range. I want to lift on the frame close to the axle but all the suspension parts are in the way, in line with the frame rail. All the ...
Forum Discussion
goducks10 wrote:If the spring got pushed up, wouldn't the tire then come off the ground?powderman426 wrote:
Assuming its a dual axle trailer, just drive the other wheel onto a couple pieces of wood. Be sure to loosen the lug nuts before lifting. No jack needed.
Not to dispute that idea but I recently read on another forum about a guy that tried that and because his trailer was so heavy it just pushed the springs up and the tire never came off the ground.
That way will work as long as the trailer springs aren't maxed out IMO.
B.O.
