Fastfwd75 wrote:
1- Should it come equipped with the tool to turn the scissor levelling jacks? I used my drill and sockets/ratchet. Could not find any tool for jacks or to change wheels. Brand new TT.
2- Is it normal that my F250 back(corner lights) comes in contact with the trailer when at a very sharp angle backing up?
3- Any trick to getting the hitch to let the ball go? I had to turn it up and down a few time, jiggle it, jump on the bumper a few times before I could unclamp it.
4- Where do you take your level? I used a large level so could not fit it with the refrigerator. I used the kitchen counter to level it.
1. A tool should have been included for the jacks but tire lug wrenches are usually not
2. No, you need to correct this ASAP and not turn so sharply also.
3. You have to relieve the pressure from the coupler
4. Take your pick, very little is actually level on an RV anyway.
