New (maybe) Class A owner and Jeep JK
We might be pulling the trigger on a new Class A motorhome this weekend. I have a 2015 Jeep wrangler JK that I would like to use as a toad. I currently have a TT so I am totally new to the motorhome...
Forum Discussion
dahkota wrote:
We pull our 2015 Wrangler with a Ready Brute Elite. It is a tow bar and surge brake in an easy to connect package. We have driven 40K miles with this set up without a problem. It takes one person less than five minutes to hook or unhook. Two can do it in two minutes.
To connect the tow bar to the Jeep, we installed a custom bumper(Rockhard)instead of adding a base plate. Using the custom bumper instead of the baseplate allows us greater ground clearance, a level towing hook-up, and space for a winch on our jeep.
We also use a Mopar Wiring harness(Part #82211156AB) to have working lights on the jeep.
Our A is a 34' Bounder with a 5K towing capacity. It is a 22K F53 chassis. It has no problem at all pulling the jeep, even on grades as high as 15 percent. The only time we feared not getting up a hill was on the Dalton Highway.
We really like our set up and wouldn't change any component. Good luck with your new adventure!
Thank you for the info. I remember seeing something about the Mopar wiring harness when I purchased the Jeep. Where does this install on the Jeep?
