I found the instructions, but they are not great. Where do the washers go? Don't the 2 bolts that go through the hitch head and shank (torqued to 260 ft-lbs) hold the angle anyway? It looks like there are 2 "setscrews" that adjust the tilt, but maybe they are just to hold while you are adjusting and the 2 heavy bolts that get torqued down are what really do the holding?
This will end up with a 7,000 total loaded weight trailer tied to a 3/4 ton Ram, so the details might not be CRITICAL, but I'm overly paranoid.
