Forum Discussion
Grumpy374
Apr 23, 2015Explorer
Sorry guys, but I'll keep turning the key to first position and leave it there. Owners manual has those instructions, and I talked with a Subi factory techie at the Subi plant years ago, and that is the proper way to set a Subi up to tow. Not just the Crosstrek, but any manual tranny Subi.
From page 9-15 in the 2013 Subi Crosstrek Owners Manual, towing with all 4 wheels on the ground----
1. Release emergengy brake. Put the transmission in neutral position.
2. Ignition switch should be in the "acc" position while the vehicle is being towed.
3. Take up slack in the towline slowely to avoid damage to the vehicle.
Warning Notice---Never turn the ignition switch to the "lock" position while the vehicle is being towed because the steering wheel and the direction of the wheels will be locked.
Grumpy
From page 9-15 in the 2013 Subi Crosstrek Owners Manual, towing with all 4 wheels on the ground----
1. Release emergengy brake. Put the transmission in neutral position.
2. Ignition switch should be in the "acc" position while the vehicle is being towed.
3. Take up slack in the towline slowely to avoid damage to the vehicle.
Warning Notice---Never turn the ignition switch to the "lock" position while the vehicle is being towed because the steering wheel and the direction of the wheels will be locked.
Grumpy
About RV Tips & Tricks
Looking for advice before your next adventure? Look no further.25,178 PostsLatest Activity: Dec 11, 2025