Pressure Pro sensor problem, maybe
I have a 2004 Winnebago Sunrise, 32 foot Class A. I seem to have bad tire karma. Always had trouble with tire pressure on the rig. Last week had new tires put on, pressured up and re-installed the Pre...
Forum Discussion
kakampers wrote:
Pressure Pro has a little rubber seal that sometimes gets "pinched" or torn...this will cause a slow leak. Contact Pressure Pro about having the seals/grommets replaced...
Pressure pro will gladly SELL you a kit to repair the seals in the sensors- for around $15 plus $7 for shipping. I feel that they should not charge as much as they do for the repair kit. Also, there are other tire pressure monitor systems on the market that have sensors with user replaceable batteries and flow through sensors. When your Pressure Pro sensors need replacement they are about $35 apiece (I'm sure that they also would charge shipping).
