Prodigy P3 Issues
I recently purchased a Prodigy P3 brake controller. After installing it, I have run into an issue about the brakes engaging on the TT. I have set the P3 to 7.5 and the boost to 2 and the type to E...
Forum Discussion
I'm finding braking with my new 5'er is very poor. It makes no difference if I set the volts to 5 or set it to 12. Boost settings have no effect.
If I use the manual slider on full from 25mph it will slow down TV/FW combo slowly. No lockup or even close to it.
Had one shop check and adjust brakes and they've said all is good. Had a different shop check voltage at TV's connector and they said all is good. No idea where to go now other than accept poor brakes is just the way it is. TV's brakes are strong and some braking from FW along with EB and its just barely acceptable.
If I use the manual slider on full from 25mph it will slow down TV/FW combo slowly. No lockup or even close to it.
Had one shop check and adjust brakes and they've said all is good. Had a different shop check voltage at TV's connector and they said all is good. No idea where to go now other than accept poor brakes is just the way it is. TV's brakes are strong and some braking from FW along with EB and its just barely acceptable.
