question about towing a 2016 jeep wrangler
we bought a 2016 jeep wrangler 2 door and today we got it back from the shop that put on the base plate. we got all the wires done plus the supplimental braking system. here's my question, i am rea...
Forum Discussion
klutchdust wrote:bob_nestor wrote:klutchdust wrote:
After hooking up and being sure it is in neutral just go. I always check everything each time i stop and just before i get into the coach. Of course plan ahead as you cannot back up. Did you ever ride your bicycle with no hands on the bars, same principle.
Put the transfer case into neutral, NOT the transmission - leave the transmission in Park (for automatic).
Well of course, my comment was made assuming the poster knew the sequence of events that need to occur before towing to reach the neutral status. As I said, put it in neutral.
Didn't intend to make you feel like an idiot, but if the poster knew the sequence of events that need to occur before towing (from reading the owner's manual), why would he need to come here asking for advice? All the information I needed to know about towing my 2011 Wrangler I found in the Owner's Manual and I doubt that's changed for 2016.
