Forum Discussion

Damdifino's avatar
Damdifino
Explorer
Jun 20, 2014

Questions about Equalizer hitch

I recently gave up on my Andersen hitch (but that's a topic for another post). I have a couple of questions about my new Equalizer hitch: 1. Can you substitute another kind of grease for the Equalizer lube, and 2. Can you leave the hitch head locked inside the coupler when you're gone from camp? Or how do you store it? I'll be out four-wheeling for a coupe of days at a time and I don't want to leave it in the receiver.

22 Replies

  • Ron3rd wrote:
    I use the Mobil 1 synthetic bearing grease on my EQ simply because that's what I have laying around. You can use any such heavy duty grease, some use a spray lithium grease, doesn't matter. You don't have to buy the EQ grease, but can if you want. As to your other question if I understand correctly, yes you can leave the hitch head in the RECEIVER if you like, some use a locking pin. I remove mine and set it a shallow plastic bin in the bed of the truck so I don't have that shin-buster where somebody could walk into it.


    Sorry, I wasn't clear. I meant pulling it out of the TV receiver and hitching it into the trailer coupler with a padlock, i.e., leaving it hanging there.
  • Ron3rd's avatar
    Ron3rd
    Explorer III
    I use the Mobil 1 synthetic bearing grease on my EQ simply because that's what I have laying around. You can use any such heavy duty grease, some use a spray lithium grease, doesn't matter. You don't have to buy the EQ grease, but can if you want. As to your other question if I understand correctly, yes you can leave the hitch head in the RECEIVER if you like, some use a locking pin. I remove mine and set it a shallow plastic bin in the bed of the truck so I don't have that shin-buster where somebody could walk into it.

About RV Tips & Tricks

Looking for advice before your next adventure? Look no further.25,150 PostsLatest Activity: Jul 21, 2025