Barker 3500VIP quit working
Worked alright this morning, then tonight just grunts but won't lower or raise. Hand crank works fine. I have 12.67 volts. Anyone know of any common failures on this model? Thanks for any help
Forum Discussion
Thanks guys. After checking a little further I bypassed the switch and found it to be defective. Ordered a new switch from Barker and installed it earlier today and works like a champ again. No visible signs of water intrusion, apparently just failed internally.
2007 Jayco Jayfeather 29N
2000 F350 XLT SD SC SRW 6.8 V-10:B
Barker 3500 VIP
Kipor 3000i
2 6 volts for juice :B
2007 Jayco Jayfeather 29N
2000 F350 XLT SD SC SRW 6.8 V-10:B
Barker 3500 VIP
Kipor 3000i
2 6 volts for juice :B
