TV static
We are in Yuma and with the cool weather here we are using the furnace. However, when the furnace kicks in we get alot of static on the TV (sound & picture). All the cable connections are tight. Any i...
Forum Discussion
The ferrites should go around both wires to the motor and as close to the motor as possible. Also a bypass capacitor could me added across the wires as close to the motor as possible between the ferrites and the motor. I'd guess .1 to .01 mfd at a few hundred volts. This takes a little soldering. The ready made RF suppressor is a good idea and might be a little easier to install; again as close to the motor as possible.
Russ
Russ
