Reciever size
The newer trucks seam to come with the larger receiver size, seams your not suppose to use a WDH if you have to use a sleeve in the receiver. Anything to that and why
Forum Discussion
LIKE2BUILD wrote:
I've heard of some getting an adapter sleeve then having a shop weld it to the shank to eliminate much of the slop.
KJ
Yup. That's what I did. Shop suggested first using a bolt, and welding a nut on the bottom of the receiver. Thread bolt through the nut, through the 2.5inch receiver, and push against the sleeve to lock it down. I didn't like that so I just went straight to welding it in.
Works fine.
Mike
