Round bars
Are the round bars too bent or too upwards? I used the second link. Should it be better to just use the first link and have the round bars level on the tongue/chassis of the trailer? I don't know i...
Forum Discussion
All of the above. Yes, it does look like the chain is on the wrong hook. Bars should be parallel to the trailer frame. My hitch requires not dropping more than 3 links off the hook. This allows enough chain travel that it doesn't bind when turning. You will probably have to pick up a considerable amount of weight off the truck using the tongue jack to get the chains secured. Get a cheater bar about 18" long. 1/2" pipe works good, available at any hardware store.
