Forum Discussion
Old-Biscuit
Sep 28, 2016Explorer III
Fridge AC requirements........
108V - 132V
AC has to be 'lost' for controls to swap to GAS Operation
Fridge DC requirements........
9.5V - 15.4V
Below 9.5V fridge will 'stop' operating
When AC is lost and controls swap to GAS...'check' light comes on when gas fails to light/prove
When 'check' light comes on.....GAS locks out and can not be used/check light won't clear until fridge is turned OFF then back ON
Fridge on AC ...check light flickers/gas tries but stays on AC
That is a circuit board issue.
108V - 132V
AC has to be 'lost' for controls to swap to GAS Operation
Fridge DC requirements........
9.5V - 15.4V
Below 9.5V fridge will 'stop' operating
When AC is lost and controls swap to GAS...'check' light comes on when gas fails to light/prove
When 'check' light comes on.....GAS locks out and can not be used/check light won't clear until fridge is turned OFF then back ON
Fridge on AC ...check light flickers/gas tries but stays on AC
That is a circuit board issue.
About RV Tips & Tricks
Looking for advice before your next adventure? Look no further.25,111 PostsLatest Activity: Feb 19, 2025