Single screw on dump valve won’t…
The single screw that is suppose to grip the outer cover of the cable and hold it tears away and then the valve won’t shut. What can a guy to to ensure it holds it?
Forum Discussion
No such clamp is on my valve and never was as I replaced it all two years ago.
What I did now was fasten a small hose clamp to the cable and tightened a tarp strap to the cable to help hold with tension to counter the force that wants to push the cable out of its holder when shutting the valve.
I’ll try to post a picture.
What I did now was fasten a small hose clamp to the cable and tightened a tarp strap to the cable to help hold with tension to counter the force that wants to push the cable out of its holder when shutting the valve.
I’ll try to post a picture.
