Single screw on dump valve won’t…
The single screw that is suppose to grip the outer cover of the cable and hold it tears away and then the valve won’t shut. What can a guy to to ensure it holds it?
Forum Discussion
Gdetrailer wrote:
If the cable fits through the collar you linked, it WILL fit through a wire gland.
I agree. now answer this.
You put the Wire Gland on the wire and lock it down.
How is it going to connect to the valve so that it can pull/push it open/close.. Push yes. Pull ... Well the shaft on the valve is not threaded.
Get a collar that just fits over the shaft. line up the holes so the set screw goes through the collar. INTO the shaft and grabs the wire inside. Problem solved... Works as designed..
That's why I suggested it.. The problem is stripped threads in the shaft.. you coudl also re-tap and use a larger set screw but I suspect overtightening will re-strip.
