slide outs
i have a 2011 keystone outback 5th wheel. i have mechanical operated slide outs noy hydraulic, my one slide after being retracted( closed) will not open without me manualy opening it a inch or so. ...
Forum Discussion
Some times when you have a cog and a rail, the cog will jam on the rail when to much pressure or the button is not let go but they keep over cranking, this can cause a parallel unit to go out of sink and cause binding or bind so tight against the rail that it will not start until dislodged by a push.
Check and make sure that the mechanism it self is not loose, motors, rails and all hardware associated with the slide operating mechanism.
navegator
Check and make sure that the mechanism it self is not loose, motors, rails and all hardware associated with the slide operating mechanism.
navegator
